Steel Close, Eaton Socon, St Neots, PE19 8TT. Tel: 01480 215533 

Home
| Products | Contact us 

  

 
Man Riding Davits
Standard Lifting Davits
Davits and winches for safe man-access into tanks and chambers.
Our man riding davits are designed to comply with the appropriate British Standard but still be easily handled by one man.

Our standard lifting davits can be used for lifting pumps, mixers or any other fixed piece of plant.

Why hire in a mobile crane each time you require to remove a piece of equipment?

Fit davit sockets adjacent to each piece of plant and have one davit that can be moved between locations as required

 
Metalwork Structural Steel
Structural steel walkways, handrailing, ladders, platforms and flooring for fitting externally or internally to tanks or reservoirs.

Can be manufactured in galvanised mild steel or 316 stainless steel depending on the application.

Walkways, handrailing, ladders, open mesh or solid flooring in standard materials including mild steel galvanised or stainless steel.

Where structural steel is required come to us direct and we will supply it to your requirements. ‘All our steel work is manufactured and installed to comply with the relevant British Standards. All at a cost much lower than if the same Job was supplied by the civil contractor. Cut out the middle man and his mark up. In our experience it is best to measure up and fit all items of structural steel alter the civil structures are complete. Thus ensuring that a good professional finish is achieved.

   
Elevated Inlet Works

We can provide the service to design, manufacture and install elevated inlet works structure for retrofitting to existing sewage treatment works to allow the addition of a screen, storm overflow, flow measurement etc.

Our elevated structural steel inlet works are able to accommodate almost any type of screen, can provide storm weir overflow, bypass with hand raked screen. Provision of an ultra-sonic measuring head and a baffle across the channel will allow measurement and or restrict the amount of flow that goes to treatment. All channels in contact with the effluent are manufactured from stainless steel to combat corrosion and reduce the need for maintenance.

   
© Glomac Engineering Ltd, 2009